Profile CRS6 6-Pack
Enjoy immersive audio with these SpeakerCraft Profile CRS6 Zero in-ceiling speakers that feature 6-1/2″ polypropylene woofers, 1/2″ mylar tweeters and magnetic bezel-less grilles. Sold in a convenient 6-pack
Premium Sound, Budget Price
Magnetic Grille
A magnetic bezel-less grille allows for easy painting to match any deco
Convenient Multipack
Sold in a Convenient 6-pack for installations where multiple speakers are required
All-Cardboard packaging
Minimal cardboard packaging allows for easy disposal/recycling after the job
PROFILE A6 5 PACK
It’s been a dream of audio installers and interior designers for decades: a speaker that sounds terrific but disappears into the decor. The Profile A6 is the realization of that dream — the speaker that pleases interior design aficionados every bit as much as it excites audio enthusiasts. Because the Profile A6 uses Speakercraft’s flangeless design and can be painted to match the ceiling, it’s almost invisible.
WH6.1R 5-PACK
Enjoy immersive audio with these SpeakerCraft WH6.1R ASM94611-5 in-ceiling speakers that features 6-1/2″ polypropylene woofers and 1/2″ polyamide tweeters.
-
Handles up to 50W maximum power
-
For robust and controlled audio that is crisp and clear.
-
6-1/2″ polypropylene woofer
-
With a rubber surround and a 1/2″ polyamide tweeter for a rich, dynamic soundscape.
-
60Hz – 19kHz frequency response
-
For faithful sound reproduction.
-
8 ohms impedance
-
Conducts power through the speaker.
SC PRO Commercial 6
Commercial installations are often considered to be an exercise in simply filling a space with sound. Attention to sound quality and performance is almost an afterthought, and the industry has allowed this to become the standard.
-
6 1/2″ Polypropylene Cone Woofer
-
1″ Pivoting Polyamide Dome Tweeter Mounted On A WavePlane™ Tweeter Baffle
-
UL 1480 Certified
-
Sensitivity: 88dB 1W/1m
-
Power Handling: 100 Watts
-
Transformer Taps (Com65-T): 70V: 64W, 32W, 16W, 8W
-
100V: 64W, 32W, 16W + Transformer Bypass (8 Ohms)
-
Impedance: 8 Ohms
-
Frequency Response: 70Hz – 20kHz
-
Diameter x Depth: 10 5/16″ x 8 7/16″ (261.87 mm x 214.12 mm)
-
Cut-Out Diameter: 8 7/8″ (225.42 mm)
SC PRO Commercial 8
Industry leading engineering blended with better cone technologies, designs a crossover to operate at low impedance or 70 to 100 volts and meets industry codes for UL 1480 approval. Voila` SpeakerCraft!
-
8″ Polypropylene Cone Woofer
-
1″ Pivoting Polyamide Dome Tweeter Mounted On A WavePlane™ Tweeter Baffle
-
UL 1480 Certified
-
Sensitivity: 88dB 1W/1m
-
Power Handling: 140Watts
-
Transformer Taps(Com85-T):70V:64W/32W/16W/8W
-
100V: 64W,32W,16W + LMT Bypass (8 Ohms)
-
Frequency Response: 56Hz – 20kHz
-
Diameter x Depth: 12 15/16″ x 9 5/16″ (329 mm x 236.47 mm)
-
Cut-Out Diameter: 11 1/2″ (292.1 mm)
PROFILE ACCUFIT CRS7 THREE
The finest flush-mount speakers in the world are useless if they cannot be installed due to restrictions in a specific building’s walls or ceiling. It may be a matter of sound penetrating an adjoining wall, unique code restrictions, or simply the customer’s requirements. SpeakerCraft offers the AccuFit Series to address space limitations, building codes, and living environment concerns.
The AccuFit series of shallow-depth, fully enclosed, architectural speakers ensures that the drivers have the proper amount of air space to deliver the best sound performance regardless of the installation environment. This new line of technically advanced speakers will fit just about any installation
-
Flangeless Appearance
-
7″ Aluminum Cone Woofer
-
3/4″ Pivoting Aluminum Dome Tweeter
-
Front-Mounted Treble Switch
-
Sealed Steel Enclosure
-
WavePlane Technology
-
STL (Sound Transmission Loss) Feature*
PROFILE AIM7 DT THREE
AIM Series in-ceiling speakers were the first to feature an aimable woofer/tweeter module that aims the sound in any direction you choose. No longer are you bound by the design of your room. Just mount the speakers wherever it’s convenient and point them wherever you want sound. Profile grilles are available in AIM8, AIM7 and AIM5 models.
-
Woofer Size7 (Inches)
-
Woofer ConstructionPivoting 7″ Aluminum Dual Voice Coil Woofer and Rubber Surround
-
TweeterDual Pivoting 1″ Aluminum Tweeters
-
Frequency Response50Hz – 20kHz
-
Impedance8 Ohm (Ohms)
-
Power Handling60 (Watts)
-
Sensitivity92dB 1W/1m (dB)
-
Timbre Matched to All Three Series
-
SwitchesBass and Treble EQ Switches
-
Dimensions9 5/8″ x 4 3/4″ Â Diameter x Depth
-
Hole Cutout Dimensions8 1/4″ (210mm) Diameter